Disclaimer   
Search Trains
 ♦ 
×
DOJ:
Dep:
SunMonTueWedThuFriSat
Class:
2SSLCCEx3AFC2A1A3E
Type:
 

Train Details
Words:
LHB/ICF:
Pantry:
In-Coach Catering/Pantry Car
Loco:
Reversal:
Rake Reversal at Any Stn
Rake:
RSA:
With RSA
Inaug:
 to 
# Halts: to 
Trvl Time: to  (in hrs)
Distance: to  (in kms)
Speed: to  (in km/h)

Departure Details
Include nearby Stations:      ONLY this Station:
Dep Between:    
Dep PF#:
Reversal:
Rake Reversal at Dep Stn

Arrival Details
Include nearby Stations:      ONLY this Station:
Arr Days:
SunMonTueWedThuFriSat
Arr Between:    
Arr PF#:
Reversal:
Rake Reversal at Arr Stn

Search
2-month Availability Calendar
  Go  
Full Site Search
  Search  
 
Sat Oct 1, 2016 17:39:17 ISTHomeTrainsΣChainsAtlasPNRForumGalleryNewsFAQTripsLoginFeedback
Sat Oct 1, 2016 17:39:17 IST
PostPostPost Trn TipPost Trn TipPost Stn TipPost Stn TipAdvanced Search
Technology to Harness Trains vibrations for Health Monitoring of Tunnels  
1 Answers
Aug 08 2011 (5:13PM)
General

Entry# 576     
rdb*^
Technology to Harness Trains vibrations for Health Monitoring of Tunnels

Aug 08 2011 (5:12PM)
News Entry# 33228  Trains’ vibrations could provide power for monitoring tunnels  
Posted by: rdb*^   Added by: rdb*^  Aug 08 2011 (5:13PM)
Traffic tunnels are often built in some of the most rugged and remote areas, which subjects them to extreme environmental forces while making them difficult to access. Ideally, the structural health of tunnels could be monitored in a way that requires minimal human maintenance while ensuring that the tunnels are consistently safe to drive through. In a typical structural health monitoring system, an array of sensors placed throughout the tunnel or other structure provides continuous monitoring, giving an early warning sign of any problems, such as damage due to corrosion or impact. When batteries are used to power the sensor arrays, replacing the batteries becomes an expensive and time-consuming endeavor.With this drawback in mind, researchers are developing a power unit that harvests the vibrations from passing traffic to power the wireless sensor nodes of a structural health monitoring system for tunnels. The power harvesting unit could reduce maintenance costs and improve...
more...
the performance of the sensor network.The researchers, Martin Wischke and coauthors from the University of Freiburg in Germany, have published their study on the new power supply concept for monitoring systems in a recent issue of Smart Materials and Structures. The study is part of the AISIS project funded by the Federal Ministry of Education and Research.“[Currently,] railway tunnels feature very few structural health monitoring devices,” Wischke told PhysOrg.com. “Our system can be easily mounted to any tunnel, whether it is a new building or an old one. The installation of the sensor nodes is quite easy, flexible, and time- and cost-effective, which are advantageous attributes compared to wired monitoring systems. Thus, our system is especially suited for refitting and upgrading older tunnels to improve security.”When the researchers first started investigating the use of vibrations from passing vehicles as an energy source, they found that no detailed data on the vibrations in traffic tunnels was available. So to begin, they investigated the vibrations in two tunnels: the Pfander-tunnel, a road traffic tunnel near Bregenz, Austria; and the Lotschbergbasis-tunnel, a high-speed train tunnel in Switzerland. They placed acceleration sensors in both tunnels to measure the vibrations from passing traffic. In the road tunnel, the sensors were monitored for a 3-5-minute period every hour, while each passing train was monitored in the train tunnel (more than 500 trains total). When analyzing the vibrations, the researchers found that they could determine which acceleration signals represented cars and which signals represented trucks in the road tunnel. In the train tunnel, they could determine each train’s structure, such as the number of axles and the wagon sizes. They could also identify passenger trains based on their smaller accelerations, which are a result of better wheels and suspensions to improve passenger comfort.In terms of usable energy, the researchers found that only the vibrations in the train tunnel were sufficient for harvesting; vibrations at various locations along the road tunnel were too small to be useful due to vehicles’ suspensions and pneumatic tires. While the vibrations in the train tunnel were strongest directly on the railroad track, the researchers decided to forego mounting a vibration harvester on the rail because screw holes pose problems, such as causing cracks. Instead, the researchers mounted vibration harvesters on the railroad sleepers/ties due to the larger space and easier access, even though the vibration amplitudes are smaller there than at the rail.
The researchers then designed, fabricated, and tested a piezoelectric vibration harvester capable of harvesting vibrations across a broad frequency, since each train produces a slightly different frequency spectrum. The energy is then stored in a capacitor and supplied to the sensor system when needed. In order to ensure safe handling of the harvested energy, the researchers designed an ultra-low power control circuit that monitors the storage capacitor voltage and disconnects the sensor circuit from the capacitor if not enough energy is available. While other power control circuits exist that consume several microwatts to operate, the new circuit’s simple design enables it to run on a current of just 70 nA.In the future, the researchers plan to make some improvements to the system, including expanding the harvested frequency spectrum and increasing the power output, and then prepare the system for industrial applications. In addition to energy harvesting, the system could be used in railway traffic surveillance, since details about the passing train (such as the quality of the wagon wheels and wagon weight) can be derived from the vibrations.
Scroll to Top
Scroll to Bottom


Go to Mobile site